| What is the cause of leaks from the unit or filter bowls? |
| Leaks from the reverse osmosis unit or filter bowls can be caused by loose fittings; a missing, damaged, or improperly seated O-Ring; or an improperly inserted plastic ferrule on the brass fitting. - If the fittings are not tightened, then carefully re-tighten the fittings. - If the O-ring is missing or damaged then contact a dealer or Premier for a replacement. - If the O-Ring is out of round, make sure the O-Ring is properly lubricated and inserted into its housing before replacing the housing. - If the plastic ferrules are inserted backwards, remove and re-orient them, making sure the tapered end points toward the valve. Home Page | FAQs | Glossary | Contact Us |